Progressive cavity pumps for sludge are core positive displacement pumps, featuring non-clogging, low pulsation, high lift for high-viscosity media and solid-containing sludge conveyance. Driven by meshed stator and rotor forming sealed chambers for axial medium transfer, they fit harsh full-process sludge treatment conditions and act as key conveying equipment for municipal sewage and sludge treatment.

I. Core Application Scenarios in Municipal Sludge Treatment

Municipal sludge (primary settling, excess activated, mixed, dewatered cake) from domestic sewage plants has a concentration range of 0.5% (dilute) to over 30% (dry cake), with high viscosity and light impurities like sediment and fibers. The pumps adapt to continuous operation, low-flow anti-sedimentation and compact space requirements, and are applied in all key sludge transfer links:

1. Front-end Collection & Conveyance: Transfer sludge from primary/secondary sedimentation tanks to thickening tanks, solving low-concentration (0.5%~2%) sludge sedimentation and clogging issues with stable small-flow lifting for short-distance, multi-point transfer.
2. Thickening Stage Conveyance: Convey 3%~8% concentrated non-Newtonian sludge from thickening tanks to storage tanks/dewatering workshops, achieving high-lift transfer at 50~200r/min to meet quantitative and continuous sludge supply before dewatering.
3. Dewatering Core Support: Dedicated feed pump for plate-and-frame/belt/centrifugal dewaterers, providing stable adjustable pressure (0.6~1.6MPa) and adapting to dynamic sludge concentration changes (8% to over 20%) during dewatering, avoiding feed port clogging by fibers/flocs.
4. Dewatered Cake Transfer & Transportation: Convey paste-like cake (20%~40% concentration, 60%~80% moisture) for horizontal long-distance (≤100m) and vertical high-lift (≤80m) transfer, solving the problem of high-dryness sludge conveyance and pipe clogging.
5. Emergency Disposal & Reflux Conveyance: Mobile skid-mounted installation for emergency sludge transfer during overload/process failure; precise small-flow reflux control for sludge back to biochemical tanks to adjust water quality.

II. Typical Application Cases

1. Large Municipal Sewage Plants (Daily Treatment ≥ 500,000 m³)

Case: A core Yangtze River Delta city plant (800,000 m³/d, AAO+advanced process, 1,200t/d sludge, 99.2% moisture)

• Pump Configuration: 16 large-flow horizontal pumps (80~100m³/h, 20~30m) for front-end transfer; 24 high-pressure variable frequency pumps (20~30m³/h, 1.6MPa) for plate-and-frame dewaterer feeding; 8 high-viscosity paste pumps (15~20m³/h, 60m) for cake transportation.
• Effect: 24h continuous operation, no clogging/failure, 22h+ daily running per pump, 30% higher dewaterer feed efficiency, 50% higher conveyance efficiency than centrifugal pumps.
• Key Adaptation: Variable frequency pumps for precise flow/pressure adjustment, one-for-use-one-for-standby installation for multi-unit interlocking.

2. Medium-sized Urban Sewage Plants (100,000~500,000 m³/d)

Case: A new first-tier city plant (300,000 m³/d, MBR process, 450t/d sludge, 99.5% moisture, compact space)

• Pump Configuration: 10 wall-mounted small horizontal pumps (10~15m³/h,15~20m) for sludge reflux/transfer; 8 medium-pressure pumps (15~20m³/h,1.2MPa) for centrifugal dewatering; 2 mobile skid-mounted pumps for cake transfer.
• Effect: Low-shear protection for sludge flocs, 60% less floor space than centrifugal pumps, 25% higher MBR membrane tank stability, 5% lower dewatered sludge moisture than design value.
• Key Adaptation: Miniaturized/integrated pumps (wall-mounted/skid-mounted), precise flow control for refined MBR/AAO processes.

3. County-level Small Sewage Plants (≤ 100,000 m³/d)

Case: A central China county plant (50,000 m³/d, traditional activated sludge process, 80t/d sludge, 99.7% moisture, limited budget)

• Pump Configuration: 4 vertical pumps (5~8m³/h,15m) for thickening-dewatering transfer; 4 economical low-pressure knob-type pumps (8~10m³/h,0.8MPa) for belt filter press feeding; multi-use as desilting pumps for tanks.
• Effect: Easy operation/maintenance, no clogging, 30% project cost saved vs separate desilting equipment, high cost performance for small teams.
• Key Adaptation: Economical vertical mini pumps, one-machine multi-use (conveyance+desilting) for low operation cost.

III. General Implementation Key Points

1. Model Matching: Select flow/pressure based on treatment capacity, sludge concentration and transfer distance/lift; variable frequency for large plants, economical fixed/simple variable frequency for medium/small plants.
2. Installation Design: One-for-use-one-for-standby (large plants), integrated/wall-mounted (medium), vertical small-space (small); 8~12mm aperture filter at inlet for anti-impurity jamming.
3. Accessory Selection: Nitrile rubber (NBR) stators and 45# chrome-plated steel rotors for municipal sludge (weak corrosion/mild abrasion) — high cost performance and wear resistance.
4. Operation & Maintenance: Regular stator/rotor replacement (3~6 months) with maintenance files for large plants; easy-disassemble models and simplified maintenance for medium/small plants.

Kaiyan supplies Complete generic replacement NEMO/Netzsch/Seepex/Mono progressive cavity pump spare parts，such as stators, rotors, coupling rod, driving shaft, seals, and are suitable for NETZSCH/SEEPEX/MONO screw pump parts. We have enough stock to ship at any time. learn more

Customized Solutions,Email:celia@kynspump.com, WhatsApp:+86 153 1226 1613, Welcome to contact us at any time.

• Facebook
• YouTube

The post Application of Screw Pump in Municipal Sludge Treatment first appeared on kynspump.com.