January 2026

What pump is suitable for high viscosity liquids/fluids?

Leave a Comment / Customized solutions /

Screw Pump for High Viscosity Fluid – Sludge/Grease/Melt Transfer, Stable Non-Pulsating Flow Engineered for Thick Media, Solving Centrifugal Pump Clogging & Unstable Flow Issues, Ideal for Food/Chemical/Oil Industries Looking for an efficient solution for high viscosity fluid transfer? progressive cavity pump is your top choice. Designed for thick media like sludge, grease, polymer melt and […]

What pump is suitable for high viscosity liquids/fluids? Read More »

Solutions to Unstable and Decreasing Flow Rate of screw Pump

Leave a Comment / Common Problems During Screw Pump Operation /

1.Clear blockages in the suction pipeline and inspect and seal air leakage points Disassemble the suction pipeline to remove accumulated impurities and sediments; inspect connection parts such as pipeline flanges and joints one by one, replace aging gaskets, weld and repair cracked pipelines or replace them directly, ensuring the pipeline is free of air leakage

Solutions to Unstable and Decreasing Flow Rate of screw Pump Read More »

Why does the screw pump decreasing flow rate or unstable?

Leave a Comment / Common Problems During Screw Pump Operation /

1.Clogging or air leakage in the suction pipeline  Accumulation of impurities and sediments in the suction pipeline will hinder the normal suction of the medium; loose seals or cracks at pipeline joints will cause air to seep into the pump body, damage the suction-discharge balance of the pump, and then lead to flow fluctuation or

Why does the screw pump decreasing flow rate or unstable? Read More »

Handling Measures After progressive cavity pump Dry Burning

Leave a Comment / Common Problems During Screw Pump Operation /

After the screw pump is running idle, if handled properly, the damage to the spare parts can be minimized. 1. Immediate shutdown & coolingStop the pump at once; cool naturally to room temperature. Do NOT disassemble when hot to avoid deformation 2. Comprehensive component inspection – Check stator for cracking/deformation/severe wear → replace if damaged irreversibly  Inspect

Handling Measures After progressive cavity pump Dry Burning Read More »

How to avoid dry running of screw pumps?

Leave a Comment / 未分类 /

✅Solutions to Avoid Dry Burning  dry running.(Preventing stator dry-running wear is key to extending progressive cavity pump service life.) The first part to be damaged was screw pump stator.No matter in what situation,progressive cavity pump for sludge transfer pump,sewage pump(sewage/wastewater treatment),oil and gas transfer,Food transfer,any more 1. Install protection devices Equip with low-flow sensors, suction pressure switches,

How to avoid dry running of screw pumps? Read More »

Causes of screw pump Stator dry-running wear

Leave a Comment / Common Problems During Screw Pump Operation /

1.The progressive cavity pump suffers from stator dry-running wear due to lack of medium， Insufficient or interrupted medium supplyLack of conveyed fluid (empty suction tank, blocked inlet pipeline) eliminates lubrication and cooling between stator and rotor. How to determine if the stator has suffered from dry burning and wear? The inner wall of the rubber shows

Causes of screw pump Stator dry-running wear Read More »

Shopping Cart

Product Enquiry